Barlo™ Configuration
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
The Barlo™ Strobe Enhanced Traffic Signal is available in several standard configurations. In addition, Elliott Equipment Corporation will customize your Barlo™ traffic product to meet your individual requirements.
Barlo™ Products
Configuration
The Barlo™ light is available in several configurations.
a. The most common is when the red interval is active the Strobe pulses approximately 60 times a minute (1 time per sec) for the duration of that interval.
b. In red or amber section of a Flashing Signal indicating a dangerous intersection or a four-way stop. (must be correctly ordered to be used in flasher operation)
c. In the amber section to warn the motorist that the signal is soon changing to red. This must be ordered with the 120 per min approximate flash rate.Many common options are available. Do you have a special requirement? Call or request a Quick-Quote™.
Time Out option: This option will turn off the strobe after the red interval has been active for a predetermined time. This option is mainly used on signals that are programmed to go to red-rest at off-peak times.
Discharge-disconnect option: This option will disconnect the AC power and discharge the high voltage supply when the colored lens is removed. This feature gives the service technician added protection from accidental shock.
Low wattage option: This feature includes a power inverter to enable the user to place the light in a remote location that uses L.E.D. lenses and portable battery power.
Standard traffic signal housing colors are Highway safety YELLOW, Forest GREEN, and BLACK.
Our
Partners
Dubois
Graco Inc.
Global Finishing
ITW DeVilbiss
ITW Binks
Research Products
Miracle Mixers
Nordson
Paasche
