Barlo™ Ordering Information
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
The complete BARLO single section head can be ordered in several different configurations. please review the following worksheet before ordering so the product will be delivered to your specifications. Click to request a Quick-Quote™.
Barlo™ Products
Now there's two ways to order your signals, Standard and Retrofit kits!
Click image to enlarge
Click image to enlargeStandard Options
The complete single section BARLO light comes in two styles, automatic operation and flasher operation.1. The automatic operation is used when a the strobe light must flash for a predetermined continuous flash rate for the duration of time that power is applied to the signal head, for example if you want the signal to flash once per second for the entire red interval of the timing cycle.
2. Flasher operation signals are used when the signal is used with a external flasher that determines that flash rate and flashes both the incandescent and strobe light at the same rate, for example four-way stop, advanced warning signs and railroad crossings.
Select one style from the row to the right of each title.
Optional
A discharge and disconnect option is offered for removing power and discharging the power supply when a technician removes the lens to gain access to the strobe unit. The auto time out option is a variable timer that is used to turn off the strobe unit after the set time and before the completion of the entire red interval. This is useful for extended flash tube life.
Indicate the optional item when ordering.
DISCHARGE/DISCONNECT
AUTO TIME OUTBARLO Retrofit Kit Ordering Guide
Click image to enlarge
The BARLO Retrofit kit is designed to screw on to any existing aluminum signal housing. This saves time and money when the modernization of existing signalized intersection does not require a new signal head but does require the addition of a strobe signal. The same two styles, automatic operation and flasher operation are available for the retrofit kit. We include a tube of silicone sealant for each 5 kits for sealing the flash area.
1.The automatic operation is used when a the strobe light must flash for a predetermined continuous flash rate for the duration of time that power is applied to the signal head, for example if you want the signal to flash once per second for the entire red interval of the timing cycle.
2.The Flasher operation signals are used when the signal is used with a external flasher that determines that flash rate and flashes both the incandescent and strobe light at the same rate, for example four-way stop, advanced warning signs and railroad crossings.
Select one style from the row to the right of each title.
Optional
A discharge and disconnect option is offered for removing power and discharging the power supply when a technician removes the lens to gain access to the strobe unit. The auto time out option is a variable timer that is used to turn off the strobe unit after the set time and before the completion of the entire red interval. This is useful for extended flash tube life.
Indicate the optional item when ordering.
DISCHARGE/DISCONNECT
AUTO TIME OUT
Our
Partners
Dubois
Graco Inc.
Global Finishing
ITW DeVilbiss
ITW Binks
Research Products
Miracle Mixers
Nordson
Paasche
