Finishing and fluid handling equipment distributors  
 
  (Search our site)    
 
Finishing Products

Chemco Booth Filtration Products

Booth filters and coating - some companies offer low prices. Others offer quality. Chemco offers both! Whether it's an economically priced product or premium product, it's offered at the very best value possible. Chemco Manufacturing Company Inc. is committed to providing high quality, OSHA & EPA compliant paint spray booth filter and coating products to government and industries world wide. Their main goal is to ensure the satisfaction of Chemco’s customers by providing high quality products. Our knowledgeable experienced staff will assist companies in their efforts to maintain a safe, efficient, cost effective spray booth.

chemco booth filters

booths, ovens, conveyors

 

 


Elliott Equipment Corporation carries a significant inventory of Chemco high quality filtration products. In fact, most orders are shipped within 24 hours.

Chemco offers a wide variety of spray booth filtration products for downdraft and cross draft paint booths and prep stations. For the most part, filtration products required for all of these fall into three general categories, which are color coded to the drawings at left, which indicate their placement in each type of booth.

Air Intake booth filters are as important to a great paint job as the booth itself. The intake filters are the primary defense against foreign particles landing on the painting surface. Any particle larger than 10 microns can cause a defect on a paint job. Intake filters are typically either panels or pads. Intake filters in a down draft booth and prep stations are above the painting surface. In cross draft booths, they are typically in the door.

Exhaust booth filters play an important role in maintaining proper air flow balance, increasing cleanliness of exhaust stacks, reducing maintenance of the exhaust system and in controlling V.O.C. emissions. The purpose of exhaust filters is to capture overspray particles and remove them from the air stream as air is removed or re-circulated back into the booth.

Cross draft and semi-downdraft booths use media pads, which are placed on grids in the rear wall or lower portion of the side walls in filter housings. Downdraft booths use a long pad that is placed into a pit below the painting surface. A pre filter is designed to filter out large particles before the air reaches the intake filter. This prolongs the life of the intake filter, increases airflow in your spray booth and reduces maintenance costs on the intake stack and mechanical parts. The pre filter is typically found only in heated booths. Cross draft booths will very rarely have a pre filter. In downdraft and semi-downdraft booths, the pre filter is located somewhere along the duct-work bringing air into the spray booth.

The Chemco family of products includes the following:

Booth Filters
Booth Coatings
Dust Collection
- Air Filters
- Dust Cartridges
- Fabric Filter Bags

Floor Covering
Paint Pockets
Powder Filtration
- PTFE Cartridge
- Pulsator
- Two Pocket Filters

Catalogs
Chemco Booth Filter Products
Booth Filter Selection Tips
Selecting Powder Booth Filtration

Select the search button to open the Elliott Equipment "Product Locator". Search online to find the Chemco part numbers and products you need.

Product Locator
Search for Systems Information

If you already know the products you require, use our Quick-Quote™ to obtain a fast, free quotation.

 


 
HOME>

Our Partners
Dubois

Graco Inc.
Global Finishing
ITW DeVilbiss
ITW Binks
Research Products
Miracle Mixers
Nordson
Paasche

Copyright Elliott Equipment Corporation 2003