Global Finishing Ovens & Washers

Select the link to view a sample of the product offering. If you can't find the individual product you require, select the product locator and chances are we carry it! All brochures are supplied in (pdf) format for viewing or free downloading. Some brochures are content rich and large files which may take a few moments to download.

Product Locator

Finishing Ovens

Burn-off Ovens

Designed to safely remove paint, powder coating, epoxies, lacquers, urethanes, and other organic or inorganic compounds. Features a Built-In Service Cart. Cart as illustrated is manufactured from heavy-duty 4" structural steel. Unit rolls outside of furnace on removable track for fast unloading and loading.

Curing (UV/HV) Ovens

All Components are Designed to Ensure Easy and Fast On-Site Assembly. Includes All Piping and Electrical Connections. Global Finishing Solutions Batch Ovens are designed to eliminate the problems associated with moving a pre-assembled unit through the plant to the work site, as well as the added expenses of renting special equipment for handling fully-assembled units as well as the problem of obtaining special permits for hauling extra-wide equipment.

Gas Catalytic Infrared Ovens (Booster oven)

Custom Design - Booster, or Pre-Gel, ovens are used before convection ovens. The object is to put as much energy into the coating/part as possible within a short distance to elevate the surface temperature to about 350°F to induce flow. The length of the oven is dependant upon the line speed, mass, geometry, and substrate of the part. Typical booster ovens are from 5 to 15 feet in length. Zoning for these ovens tends to be minimal, as there is no danger of scorching the coating at the start of the cure process and the heaters are operated at their maximum settings. Zoning is limited to horizontal groups of heaters.

Curing or Dry-Off Oven Systems

Custom designed to meet production requirements with maximum efficiency. Global Finishing Solutions also features an Internal Loop System - featuring air seals to minimize the amount of heated air in the oven escaping to the surrounding atmosphere.

Iso-Dynamic High-Velocity Curing Oven — Cut Curing Time up to 70%

The process consists of 2 basic components: a heat source and an air distribution system. The heat source is an air heater complete with a gas-fired burner. The burner operates under pressure and is connected to a blower that provides filtered air to the air heater. The heated air is then transferred to the process area through an air distribution system that is a network of ducting and jet pipes.

The ISO-Dynamic Process uses a high-pressure, low volume airflow system, no mechanical re-circulation of air is required. Re-circulation is achieved through internal entrainment. As heated air is ejected through sized orifices in the jet pipes, a consistent turbulence is created in the process area. The impact velocity of the mixed air to the work surface is approximately 800 fpm. Also consider that the heated air has expanded through the heater box and is at a higher volume and lower density. This is referred to as "Soft Air".

Washers

Custom Washers

Single and multi stage washers and turn-key parts preparation solutions.

Multi-Stage Systems:

• Single/Dual/Triple
• Belt or Conveyor or Both

Complete Systems:

• Optional Blow-Off Device or Dry-Off Oven
• Spray, Immersion, or Combination of Both
• Control Panel

Engineered Solutions

VOC Abatement

Global Finishing Solutions offers complete VOC abatement systems that destroy over 90% of solvent vapors and odors produced during spray booth painting operations. This system based on Envirocure technology is proven in practice for spray booths and designated LAER (Lowest Achievable Emission Rate) by the U.S. EPA and BACT (Best Available Control Technology) by SCAQMD - Southern California Air Quality Management District.

Air Make-up Units- [brochure]

Global Finishing Solutions Air Make-up Units are designed for peak efficiency during all phases of the spray cycle and cure cycle. Available in multiple configurations and several power options, Global Finishing Solutions Air Make-up Units are the finest in the finishing industry.

• Adjustable thermostat for spray cycle
• Adjustable thermostat for bake cycle
• High-Limt switch for maximum booth temperature
• Adjustable timer for cure cycle
• Optional pressure gauge

Turn-key Systems and Solutions

Elliott Equipment Corporation and it's manufacturing partner Global Finishing offer a wide variety of customized booth, ovens, washer, clean rooms, paint barns and finishing systems. Simply give us your requirements and we will develop a solution that meets your project objects.

Select the search button to open the Elliott Equipment "Product Locator". Search online to find the Global Finishing part numbers and products you need.

Product Locator

If you already know the products you require, use our Quick-Quote™ to obtain a fast, free quotation.